white powder foaming agent ms 107 for pvc wpc door-0

PVC WPC Foaming Agent

Home >  Products >  Foaming Agent >  PVC WPC Foaming Agent

White Powder Foaming Agent MS-107 for PVC WPC Door

MS-107 is white powder foaming agent specially designed for PVC WPC door. It features stable decomposition, moderate gas release and uniform fine cells, ensuring low density and smooth surface of WPC door slabs.

Description

MS-107 is an organic foaming agent in white powder form, customized for PVC WPC door extrusion process. It has a suitable decomposition temperature range, releases gas steadily during heating. It helps form fine, evenly distributed closed cells inside WPC door boards, effectively reducing product weight while retaining sufficient mechanical strength. Good compatibility with PVC, wood powder and other additives in WPC formula. It brings stable foaming effect, less shrinkage and deformation, smooth board surface, no large voids or broken bubbles. Suitable for WPC door panels, WPC foamed profiles and related wood-plastic extrusion products.

Product Principle:
MS-107 contains 90% sodium bicarbonate, which decomposes endothermically within the temperature range of 155–170°C, absorbing heat and releasing carbon dioxide gas. This endothermic reaction cools the polymer melt, preventing overheating and stabilizing the foaming process. When used alongside exothermic foaming agents such as AC, MS-107 balances the overall thermal profile, reducing the risk of cell coalescence and ensuring uniform bubble formation throughout the extruded profile.

Performance Characteristics:
With a gas formation volume of 150–170 ml/g, MS-107 provides reliable foaming power while its endothermic nature delivers significant processing advantages. The low volatile content (2.5%) and minimal fugitive constituents (≤3%) ensure clean decomposition without excessive smoke, odor, or die buildup. The fine white powder disperses readily in PVC compounds, promoting consistent cell nucleation. Its compatibility with both NC and AC foaming agents allows formulators to fine-tune foam structures for specific pipe and profile applications.

Usage and Dosage:
Recommended addition level is 0.5–3 phr, typically used in combination with 0.1–0.5 phr of AC or NC foaming agents. The exact ratio depends on the desired foam density, cell structure, and wall thickness of the product. For thick-walled pipes requiring uniform internal foam, higher MS-107 proportions are beneficial. Systematic trials are recommended to optimize the blend for specific applications and processing conditions.

Special Instruction

Appearance

White powder

Fugitive Constituent

≤ 3%

Volatile

2.5%

Sodium Bicarbonate

90%

Gas formation volume

150 — 170 ml/g

Gas formation temperature

155 — 170°C

Product Advantages

1. Endothermic Decomposition for Thermal Stability:
MS-107 absorbs heat during decomposition, actively cooling the polymer melt. This prevents localized overheating that can cause cell collapse or surface degradation, particularly beneficial in thick-walled products like pipes where heat dissipation is challenging.

2. Synergistic Performance with Exothermic Agents:
When combined with AC or NC foaming agents, MS-107 balances the exothermic heat release, resulting in smoother foam expansion, finer cell structures, and reduced risk of blowholes or surface defects.

3. Enhanced Structural Stability:
The uniform cell structure promoted by MS-107 improves the mechanical integrity of foam pipes and profiles. Products exhibit higher crush resistance, better dimensional stability, and more consistent mechanical properties throughout the cross-section.

4. Clean Processing and Reduced Die Buildup:
Low fugitive constituent and volatile content ensure clean decomposition with minimal residue accumulation on processing equipment. This enables longer production runs, reduced maintenance downtime, and consistently high surface quality.

5. Versatile Formulation Compatibility:
MS-107 works effectively with various foaming agent systems and is compatible with both rigid and flexible PVC formulations, providing formulation flexibility for diverse product requirements.

General instructions

Packing: 25 kg/bag
Storage: Conventional storage
Processing: Valid for 2 years
Note: : Store in cool, dry warehouse, avoid rain, moisture. When stored, it must be kept away from fire and heat sources, avoid exposure to sunlight, and prohibit direct contact with acids, alkalis, or mixing.

Applications

1. PVC Foam Pipes:
MS-107 is specifically formulated for multi-layer or co-extruded foam pipes, where it helps achieve a uniform core layer with reduced density and consistent cell size. It is particularly valuable in drainage, sewage, and conduit pipes where weight reduction and cost savings are priorities.

2. Foam Profiles:
In window profiles, decorative trim, and construction moldings, MS-107 contributes to lightweight construction while maintaining surface quality, strength, and dimensional accuracy.

3. Foam Sheet Extrusion:
For foam sheets used in packaging, signage, or insulation, MS-107 provides the thermal control needed for flat, warp-free panels with uniform cell distribution.

4. Complex Extrusions with Varying Wall Thickness:
In profiles with sections of different thicknesses, MS-107 ensures uniform foaming across all areas, preventing density variations and maintaining consistent mechanical properties.

5. Co-extruded Foam Core Products:
For products with solid skins and foamed cores, MS-107 enables precise control over core density while maintaining excellent adhesion between layers.

Company Introduction:
Maijisen is a technology-driven manufacturer of PVC additives, headquartered in Kunshan, Jiangsu. Since 2009, we have specialized in calcium zinc stabilizers, ACR processing aids, foaming regulators, and lubricants. Our products are used in PVC/WPC profiles, boards, flooring, pipes, cables, and footwear. With a 12,000 sqm production base and a 400 sqm R&D center in Yancheng, we are committed to innovation and quality.

RFQ

1.What is the MOQ?

MOQ. is about 1ton.

2.What if your payment term?

Payment terms:100% by T/T ,30% by T/T and 70% by L/C;

3.What about the delivery ?

Delivery date:10 days.

4.Can you supply free samples?

Of course,we can supply you 200g~500g per product.

Recommended Products

  • Injection Molding and ABS Extrusion Particle Foaming Agent WE-2315

    Injection Molding and ABS Extrusion Particle Foaming Agent WE-2315

  • SPC/PVC Floor Special Toughening and Composite Stabilizer S606

    SPC/PVC Floor Special Toughening and Composite Stabilizer S606

  • WPC PE Wood Plastic Fences and Railings Color Agent Specific Color Masterbatch

    WPC PE Wood Plastic Fences and Railings Color Agent Specific Color Masterbatch

  • Injection Molding and ABS Extrusion Particle Foaming Agent WE-2315

    Injection Molding and ABS Extrusion Particle Foaming Agent WE-2315

  • MSV-206 High-efficiency Blowing Agent for PVC Foam Shoe Material Production

    MSV-206 High-efficiency Blowing Agent for PVC Foam Shoe Material Production

  • SPC Floor and Wall Panel Special Three in One Composite Heat Stabilizer S606 Ultra Simple Formula

    SPC Floor and Wall Panel Special Three in One Composite Heat Stabilizer S606 Ultra Simple Formula

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000
inquiry

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000