pvc extrusion special lubricant and plasticizer ac 6a oxidized polyethylene wax-0

Lubricant

Home >  Products >  PVC Lubricant >  Lubricant

PVC Extrusion Special Lubricant and Plasticizer AC-6A (Oxidized Polyethylene Wax)

AC-6A is a high-performance oxidized polyethylene wax specifically engineered for PVC extrusion products. It functions as a combined lubricant, plasticizer, and mold release agent, delivering excellent processing performance and superior surface quality. 

Description

Product Name:
PVC Extrusion Special Lubricant and Plasticizer AC-6A (Oxidized Polyethylene Wax)

Special Instruction:

Item Value
Appearance White powder
Density 0.98 g/cm³
Odor Odorless
Molten drop point 140°C
Melting point 145°C
Acid value 16 KOH/g
Hardness < 0.5 mm

Product Introduction:

1. Product Overview:
AC-6A is a high-performance oxidized polyethylene wax specifically engineered for PVC extrusion products. It functions as a combined lubricant, plasticizer, and mold release agent, delivering excellent processing performance and superior surface quality. With its optimized molecular structure, it provides outstanding thermal stability, uniform dispersion, and highly effective mold release. This additive is widely used in rigid and semi-rigid PVC extrusion, including profiles, pipes, sheets, and foam boards, where smooth melt flow, easy demolding, and high surface gloss are essential for high-quality and high-efficiency production.

2. Product Principle:
AC-6A operates through a multi-functional mechanism. As a lubricant, it reduces friction between PVC molecular chains and between the melt and processing equipment, lowering melt viscosity and improving flow characteristics. The oxidized functional groups enhance compatibility with polar PVC resins, promoting uniform dispersion and preventing plate-out. As a plasticizer, it facilitates the fusion of PVC grains, accelerating plasticization and improving melt homogeneity. As a mold release agent, it forms a thin, uniform film between the melt and die surfaces, preventing adhesion and enabling clean, effortless demolding. The molten drop point of 140°C and melting point of 145°C ensure early activation and sustained effectiveness throughout the extrusion process.

3. Performance Characteristics:
AC-6A delivers outstanding performance with a density of 0.98 g/cm³, facilitating easy handling and uniform dispersion. Hardness below 0.5 mm guarantees a soft, low-abrasive nature that minimizes equipment wear. The acid value of 16 KOH/g provides controlled reactivity for optimal performance. The odorless formulation creates a safe working environment, and the low recommended addition level of 0.3–0.5% ensures highly cost-effective performance. The product is compatible with a wide range of PVC formulations, including highly filled compounds, and provides excellent surface gloss and smoothness in the final product.

4. Usage and Dosage:
Recommended addition level is 0.3–0.5% based on total PVC formulation weight. For standard rigid PVC profiles and pipes requiring good lubrication and mold release, 0.3–0.4% typically provides optimal results. For complex profile geometries or high-speed extrusion lines, dosages toward 0.5% may be beneficial. For foamed PVC products where improved plasticization and cell structure are desired, 0.4–0.5% is recommended. Systematic trials should be conducted to fine-tune the dosage for specific equipment, formulations, and performance requirements.

Product Advantages:

1. Multi-Functional Performance
AC-6A combines lubrication, plasticization, and mold release in a single additive, simplifying formulations and reducing raw material inventory. This integrated approach ensures perfect compatibility between functions, eliminating the risk of interaction issues found with separate additives.

2. Excellent Lubrication and Reduced Equipment Wear
The oxidized polyethylene wax provides superior internal and external lubrication, lowering melt viscosity and extrusion torque. This reduces energy consumption and minimizes wear on screws, barrels, and dies, extending equipment service life and reducing maintenance costs.

3. Superior Mold Release and Demolding
AC-6A forms an effective release barrier between the PVC melt and metal surfaces, preventing sticking and enabling clean, effortless demolding. This reduces scrap rates, improves surface quality, and increases production efficiency, especially in complex profile extrusion.

4. Enhanced Plasticization and Melt Homogeneity
By promoting uniform fusion and plasticization, AC-6A improves melt homogeneity and reduces unmelted particles. This results in consistent product properties, better filler dispersion, and smoother surfaces in finished products.

5. Improved Surface Gloss and Appearance
AC-6A enhances surface brightness and gloss, reducing the need for secondary finishing operations. Products exhibit smooth, defect-free surfaces with excellent aesthetic appeal, suitable for visible applications such as profiles, sheets, and decorative trim.

6. Wide Processing Window and Versatility
The melting point of 145°C and molten drop point of 140°C allow AC-6A to perform effectively across a wide range of extrusion temperatures and equipment configurations. It is compatible with single-screw and twin-screw extruders, as well as calendering processes.

7. Clean Processing with Minimal Plate-Out
High purity and low volatile content ensure clean decomposition with minimal smoke, odor, or die buildup. This enables longer production runs, reduced cleaning downtime, and consistently high surface quality.

8. Cost-Effective at Low Dosage
With a recommended addition of only 0.3–0.5%, AC-6A achieves significant improvements in processing and product quality at minimal cost. This makes it an economical solution for enhancing PVC extrusion performance without increasing formulation expenses.

General instructions:

Packing: 25 kg/bag
Storage: Conventional storage
Processing: Valid for 2 years
Note: Store in a cool, dry warehouse away from heat, sunlight, moisture, and incompatible substances like strong oxidants or acids. Full information on the handling of this product is available upon request.

Applications:

1. PVC Rigid Profiles
AC-6A is widely used in PVC window profiles, door frames, and technical profiles, providing excellent lubrication, mold release, and surface gloss. It ensures smooth extrusion, consistent dimensions, and high-quality finishes.

2. PVC Pipes and Fittings
In pipe extrusion, AC-6A reduces friction and prevents sticking, enabling smooth production with consistent wall thickness, excellent internal and external surfaces, and easy demolding. It is suitable for pressure pipes, drainage pipes, and conduits.

3. PVC Sheets and Panels
For rigid PVC sheets and panels, AC-6A improves melt flow and release properties, producing flat, blemish-free surfaces with high gloss and dimensional stability. It is ideal for construction, signage, and industrial applications.

4. PVC Foam Boards and Profiles
In foamed PVC production, AC-6A enhances plasticization and cell structure, promoting fine, uniform cells and smooth surfaces. It improves foam density consistency and reduces defects in lightweight foam boards.

5. PVC Decorative Profiles and Trim
For decorative moldings and trim, AC-6A ensures smooth melt flow, excellent release, and high-gloss surfaces, delivering premium aesthetic quality for visible applications.

6. Highly Filled PVC Compounds
In formulations with high filler content, AC-6A reduces melt viscosity and improves filler dispersion, maintaining processability and product quality even at high loadings.

7. PVC Cable Insulation and Sheathing
In cable extrusion, AC-6A provides the lubrication needed for high-speed production while maintaining electrical properties and surface quality.

8. Recycled PVC Extrusion
For formulations containing recycled PVC, AC-6A compensates for reduced inherent lubricity, improving processability and final product surface quality.

Company Introduction:
Kunshan Maijisen Composite Material Co., Ltd. is a technology-driven manufacturer of innovative plastic processing additives. Our main product lines include stabilizers, acrylic impact modifiers, PVC processing aids, foaming regulators, foaming agents, lubricants, and other advanced chemical additives. Our products are widely used in WPC and PVC window profiles, foam boards (furniture boards, advertising boards, construction boards), WPC wall panels, WPC and SPC flooring, pipes and fittings, cables, and footwear. With a 12,000 sqm production base and a 400 sqm R&D center in Yancheng, we are committed to innovation and quality. Our products are trusted globally across Europe, Americas, and Southeast Asia.

RFQ:

  1. What is the MOQ?
    MOQ is about 1 ton.

  2. What are your payment terms?
    Payment terms: 100% T/T, or 30% T/T + 70% L/C.

  3. What about delivery?
    Delivery time: 10 days.

  4. Can you supply free samples?
    Yes, we can supply 200g–500g per product for testing.

Recommended Products

  • ABS Extrusion Products Special Anti Shrinkage Water Particle Foaming Agent MSA-2215

    ABS Extrusion Products Special Anti Shrinkage Water Particle Foaming Agent MSA-2215

  • WPC PE Wood Plastic Fences and Railings Color Agent Specific Color Masterbatch

    WPC PE Wood Plastic Fences and Railings Color Agent Specific Color Masterbatch

  • PVC Foaming Product Toughening Agent NCR61

    PVC Foaming Product Toughening Agent NCR61

  • PVC WPC Foaming Regulator K200 PVC Processing Aid for WPC Door Panels Door Frames PVC Foam Board Extrusion

    PVC WPC Foaming Regulator K200 PVC Processing Aid for WPC Door Panels Door Frames PVC Foam Board Extrusion

  • PVC Leather Special Stabilizer HF789

    PVC Leather Special Stabilizer HF789

  • Anti-Oxidant AT168 for PVC WPC PE Outdoor Flooring Extrusion Production

    Anti-Oxidant AT168 for PVC WPC PE Outdoor Flooring Extrusion Production

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000
inquiry

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000